The Honghua HHF-1300 HHF-1600 WITH Blak-JAK configuration pairs the HHF-series power end with the Blak-JAK fluid end, rated for a maximum working pressure of 7500 PSI at a rated speed of 120 SPM. Factory pressure ratings by liner size are: 7 in (177.8 mm) at 3689 PSI, 6.75 in (171.5 mm) at 3978 PSI, 6.5 in (165.1 mm) at 4303 PSI, 6 in (152.4 mm) at 5000 PSI, 5.5 in (139.7 mm) at 5556 PSI, 5 in (127 mm) at 6723 PSI and 4.5 in (114.3 mm) at 7500 PSI. The HHF-series frame is a welded high-strength steel-plate structure that achieves greater rigidity at lower weight than traditional cast frames; all frames are fully annealed before machining to remove welding stresses and prevent geometric deformation that would cause bearing overheating and premature wear. Both models use herringbone gears for primary drive, and the crankshaft is an integral alloy-steel eccentric design offering superior strength and fatigue resistance. We supply matching fluid-end wear parts to drilling contractors across Canada, the United States and international markets.
FAQ
What is the maximum working pressure of the HHF-1300 HHF-1600 WITH Blak-JAK configuration?
This configuration is rated for a maximum working pressure of 7500 PSI at a rated speed of 120 SPM. Pressure capability by liner size runs from 3689 PSI with a 7 in (177.8 mm) liner up to 7500 PSI with a 4.5 in (114.3 mm) liner.
Which liner sizes are available for the HHF-1300 HHF-1600 WITH Blak-JAK?
Factory data covers liner sizes of 7 in (177.8 mm), 6.75 in (171.5 mm), 6.5 in (165.1 mm), 6 in (152.4 mm), 5.5 in (139.7 mm), 5 in (127 mm) and 4.5 in (114.3 mm), with maximum pressures from 3689 PSI to 7500 PSI. Contact us for current availability of the size you need.
How are the HHF-1300 and HHF-1600 frames constructed?
The frames are welded from high-strength steel plates for greater rigidity at lower weight than cast frames, and are fully annealed before machining to eliminate welding stresses and prevent deformation that would otherwise cause bearing overheating and premature wear.
Do you stock fluid-end parts for the HHF-1300 HHF-1600 WITH Blak-JAK?
We supply liners, pistons, valves, valve seats, inserts, springs and packing for this configuration. Our online listing currently shows no dedicated stock items, so please contact us for current availability and lead time.
Can you ship parts for this configuration to Canada or the United States?
Yes. We regularly ship mud pump parts to customers in Canada, the United States and other oil-producing regions. Pump parts are classified under HS code 84139100, which helps streamline customs clearance.