The Gardner Denver TEE-BFB is a well-service pump rated by factory data at a maximum working pressure of 2950 PSI and a maximum flow of 46 GPM, with 165 HP rated input power, a 5 in stroke and a rated speed of 350 SPM. Output scales across five liner sizes: a 4 in liner gives 46 GPM at up to 1200 PSI, 3.5 in gives 35 GPM at up to 1580 PSI, 3 in gives 26 GPM at up to 2135 PSI, 2.75 in gives 21 GPM at up to 2550 PSI and 2.5 in gives 17 GPM at up to 2950 PSI. This spread makes the pump a practical choice for cementing and acidizing treatments, workover interventions and sand control services. We supply fluid-end wear parts for the TEE-BFB to service companies and operators in Canada, the United States and international oil and gas markets.
FAQ
What is the Gardner Denver TEE-BFB used for?
It serves cementing and acidizing operations plus workover and sand control services, where moderate flow and pressures up to 2950 PSI are needed.
What are the factory ratings of the TEE-BFB?
Factory data lists 2950 PSI maximum working pressure, 46 GPM maximum flow, 165 HP rated input power, a 5 in stroke and 350 SPM rated speed.
How do liner sizes change TEE-BFB performance?
A 4 in liner gives 46 GPM at up to 1200 PSI, stepping down through 3.5 in, 3 in and 2.75 in to a 2.5 in liner that gives 17 GPM at up to 2950 PSI. Smaller liners raise achievable pressure at lower flow.
Which fluid-end parts do you supply for the TEE-BFB?
We supply liners, pistons, valves, valve seats, valve springs, packing and fluid end repair kits for this pump, sized to the liner bore you run in each service unit.
Can you ship TEE-BFB parts to Canada, the US or overseas?
Yes. We export well-service pump parts to Canada, the United States and international oil and gas markets under HS code 84139100, with documentation prepared for customs clearance.