The Emsco FA-1300 TYPE II is a triplex single-acting mud pump aimed at deep-well drilling, directional drilling and high-pressure circulation work where downtime is not an option. Factory data lists a maximum working pressure of 5000 PSI and a rated speed of 120 SPM. Allowable pressure scales with liner bore: 7 in (180 mm) liners carry up to 2786 PSI, 6.75 in (170 mm) up to 2998 PSI, 6.5 in (165 mm) up to 3232 PSI, 6 in (152 mm) up to 3792 PSI, 5.5 in (140 mm) up to 4516 PSI and 5 in (127 mm) up to the full 5000 PSI. The power end frame is a high-strength welded steel plate structure with stress-relief heat treatment, and key crankshaft bearing positions are stiffened for load capacity. We supply replacement fluid end parts for this model to drilling contractors in Canada, the United States and international oil and gas markets.
FAQ
What are the factory ratings of the Emsco FA-1300 TYPE II?
Factory data lists a maximum working pressure of 5000 PSI and a rated speed of 120 SPM. Input power, stroke and flow ratings for this variant are available on request.
Which liner sizes does the FA-1300 TYPE II accept?
Factory data lists 7 in (180 mm), 6.75 in (170 mm), 6.5 in (165 mm), 6 in (152 mm), 5.5 in (140 mm) and 5 in (127 mm) bores, with allowable maximum pressure rising from 2786 PSI at the largest bore to 5000 PSI at the smallest.
What drilling duty is the FA-1300 TYPE II designed for?
It is designed for deep-well drilling, directional drilling and high-pressure circulation operations, with a rigid welded steel power end frame built for continuous operation under harsh conditions.
Which fluid end wear parts do you supply for the FA-1300 TYPE II?
We supply liners, pistons, valves, valve seats, valve springs, packing, fluid end modules, valve caps and fluid end repair kits for this model.
Can you ship FA-1300 TYPE II parts to Canada or internationally?
Yes. We ship to Canada, the United States and international oil and gas destinations; pump parts of this type are commonly classified under HS code 84139100 for customs purposes.