The Drillmec 8T750 is rated at 750 HP input power with an 8 in stroke, a rated speed of 150 SPM and a max working pressure of 5000 PSI. Its power-end frame is welded from high-strength low-alloy steel and heat treated after welding so that welding stress is fully relieved, giving better rigidity and fatigue strength than a traditional cast frame. Factory data lists liner bores from 4 in to 7 in, with maximum working pressures from 5000 PSI down to 1827 PSI depending on liner size.
FAQ
What are the factory ratings of the Drillmec 8T750?
Factory spec data lists a rated input power of 750 HP, a stroke length of 8 in, a rated speed of 150 SPM and a max working pressure of 5000 PSI.
Which liner sizes does factory data list, and what pressures go with them?
Factory data lists the 7 in liner at a max of 1827 PSI, the 6 in liner at 2480 PSI, the 5 in liner at 3582 PSI and the 4 in liner at 5000 PSI.
What is special about the 8T750 frame construction?
The power-end frame is welded from high-strength low-alloy steel plate and heat treated after welding so welding stress is fully relieved. Compared with a traditional cast frame, this avoids stress concentration and gives high rigidity with strong fatigue resistance.
What fluid-end parts do you supply for the Drillmec 8T750?
We supply liners, pistons, valves, valve seats, valve springs, packing and fluid end modules matched to the 8T750, sized to the liner bore your rig runs.
Can you ship Drillmec 8T750 parts to Canada or the United States?
Yes. We export to Canada, the United States and international oil and gas markets under HS code 84139100, with export packing and documentation handled for you.