The Drillmec 12T1600 7500 PSI MISS L FE is a triplex mud pump configuration rated by factory data at 5000 PSI max working pressure, 1600 HP rated input power, a 12 in stroke length and 120 SPM rated speed. The fluid end takes liners from 4.5 in (114.3 mm) up to 7.5 in (190.5 mm): a 7.5 in (190.5 mm) liner is limited to max 2987 PSI, a 6 in (152.4 mm) liner to max 4655 PSI, and liners from 4.5 in (114.3 mm) through 5.5 in (139.7 mm) allow operation at the full 5000 PSI. We supply replacement fluid-end parts for this configuration to contractors across Canada, the United States and international oil and gas markets.
FAQ
Which fluid-end parts fit the Drillmec 12T1600 7500 PSI MISS L FE?
We supply Liner （缸套）, Piston （活塞）, Valve （阀）, Valve Seat （阀座）, Valve Spring （阀簧）, Packing （盘根）, Fluid End Module （液力端模块） assemblies and Fluid End Repair Kit （液力端维修包） sets for this configuration.
What are the factory ratings of the 12T1600 7500 PSI MISS L FE?
Factory spec data lists 5000 PSI max working pressure, 1600 HP rated input power, a 12 in stroke length and 120 SPM rated speed.
What liner sizes are offered for this pump and what pressures do they permit?
Factory data covers 4.5 in (114.3 mm) through 7.5 in (190.5 mm). For example, 7.5 in (190.5 mm) permits max 2987 PSI, 6.5 in (165.1 mm) permits max 3974 PSI, 6 in (152.4 mm) permits max 4655 PSI, and 5.5 in (139.7 mm) down to 4.5 in (114.3 mm) permit the full 5000 PSI.
Is the MISS L FE configuration different to source parts for?
The wear-parts group is the same fluid-end family. Confirm your liner size and module arrangement when ordering and we will match the correct parts to your pump.
Can you deliver parts for this model to Canada or the United States?
Yes, we deliver to Canada, the United States and international destinations. Mud pump parts of this kind are classified under HS code 84139100 for customs purposes.